Recommended thin wall thicknessįor a selected number of perimeters and layer height, PrusaSlicer calculates the optimal thin wall thickness. You can get around this limitation by enabling Sequential printing. If you had multiple objects on the print bed, it would be impossible to print them continuously. Only one object at a time can be printed in the vase mode. Otherwise, PrusaSlicer will try (and fail) to create both inside and outside surfaces, so model the outside dimensions only. Furthermore, you can adjust the External perimeters Extrusion width in the Advanced menu to get a thicker/stronger/watertight vase (e.g. You can still adjust the number of bottom solid layers. Keep in mind that simply changing these settings and not enabling the vase mode is not the same as true vase mode, as the object won’t be printed continuously. disabled "ensure vertical shell thickness".When the vase mode is activated, PrusaSlicer automatically sets related settings accordingly: Instead, the height is increasing gradually all the time, until the top of the print is reached. Spiral vase does not have any such point where the layer changes, with the exception of the first N bottom solid layers. ![]() This scar is also a weak point of the print. This spot, where the printer stops and finishes the perimeter, raises the Z height by the layer height and starts a new perimeter, creates an unsightly ‘scar’ running up the side of the model. When printing anything with a single-perimeter wall, there is always a small flaw where the printer advances to the next layer. If you want to have a stronger print, increase the number of perimeters.Ĭreates a continuous single outline container, gradually increasing the Z height. The strength of a model is mostly defined by the number of perimeters (not the infill).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |